| Telco's trench heater type TRL is a
practical alternative to underfloor heating, requiring no
wall space and giving excellent heat output. The Trench is
built into the floor and covered by a stylish grille. Trench
units are ideally positioned in front of an expanse of glass
such as conservatories, patio windows or public areas. the
grilles are designed to be walked on and are the only part
of the heating unit visible at floor level.
The heaters are made
from aluminum and designed for external
controls. Two installation nipples permit further
connection.
|
Type |
EL number |
Power |
Height |
Length |
Depth |
Beskrivelse |
|
TRL 03 |
54 493 90 |
300 W |
95 mm |
550 mm |
93 mm |
Low-temperature trench heater |
|
TRL 04 |
54 493 91 |
400 W |
95 mm |
800 mm |
93 mm |
with thermal cut-out. |
|
TRL 05 |
54 493 92 |
500 W |
95 mm |
1000 mm |
93 mm |
For permanent installation , og external |
|
TRL 06 |
54 493 93 |
600 W |
95 mm |
1200 mm |
93 mm |
adjustment
1/4
- 1/2
- 1/1
|
|
Floor brackets |
54 492 44 |
|
|
|
|
|
The heaters are manufactured from extruded
aluminium sections. The complete heating element is also
made from aluminium and incorporates a heating coil,
insulation, cooling fins and connection lead in one unit.
This is a tried and tested design that provides excellent
heat distribution and a long lifetime.
|
Specifications |
|
Flow-through heater
for permanent installation and external adjustment,
with thermal cut-out. |
|
230 V |
|
Colour:
natural aluminum |
|
Splashproof and rustproof; can be used in wet rooms. |
|
Connection: Right-hand
side |
|
Fitting to walls:
Heaters must be fitted horizontally and are
delivered with solid wall brackets. |
|
Floor installation:
Heaters can be fitted to the floor using floor
brackets that need to be ordered separately |
|
Max. surface
temperature:
60°C |
|
Installation
distance requirements |
GIU /
GIUS |
|
Minimum distance to
side wall: |
2 cm |
|
Minimum distance to
floor: |
5 cm |
|
Minimum distance to
grille above the heater: |
15 cm |
|
