Telco Fabrikker AS / Heaters

Interior heaters - TIU / TIUS / TU

TIU / TIUS

Telco's interior heaters type TIU/ TIUS/ TU are tried and tested flow-through heaters. These heaters have a splashproof design and are suitable for use in all types of rooms, both wet and dry.

These heaters has higher power per length unit than most other heaters on the market, and is therefore well suited to bathrooms and other rooms with high heating requirements and limited space.

Type

EL number

Power

Height

Length

Depth

Description

TIU 03

54 490 25

300 W

150 mm

403 mm

86 mm

Normal-temperature interior heater

TIU 08 54 490 26     800 W 150 mm
682 mm
86 mm with switchbox for permanent

TIU 12

54 490 27

1200 W

150 mm

893 mm

86 mm

installation

TIU 16

54 490 28

1600 W

150 mm

1157 mm

86 mm

TIUS 03

54 490 30

300 W

150 mm

403 mm

86 mm

Normal-temperature interiorheater

TIUS 08

54 490 31
    800 W 150 mm
682 mm

86 mm

with cable and plug

TIUS 12

54 490 32

1200 W

150 mm

893 mm

86 mm

TIUS 16

54 490 33

1600 W

150 mm

1157 mm

86 mm

TU 03

54 490 35

300 W

150 mm

353 mm

86 mm

Normal-temperature interior heater

TU 08

54 490 36
    800 W 150 mm
632 mm

86 mm

for external controls and permanent

TU 12

54 490 37

1200 W

150 mm

843 mm

86 mm

installation.

TU 16

54 490 38

1600 W

150 mm

1107 mm

86 mm

Floor brackets

54 490 45

Open or download technical document:

TIU-TIUS-TU english.pdf

The heaters are manufactured from extruded aluminium sections. The complete heating element is also made from aluminium and incorporates a heating coil, insulation, cooling fins and connection lead in one unit. This is a tried and tested design that provides excellent heat distribution and a long lifetime.

The controls are easily accessible and clearly visible on the right-hand side of the heater.

TIU, TIUS and TU can all be lacquered in special colours and supplied with curtain clamps and floor brackets, for details look at the page: Additional

Specifications

Flow-through heater with thermal cut-out

230 V

Colour: Pearl white

Splashproof and rustproof; can be used in wet rooms.

Connection: Right-hand side

Fitting to walls: Heaters must be fitted horizontally and are delivered with solid wall brackets.

Floor installation: Heaters can be fitted to the floor using floor brackets that need to be ordered separately

Max. surface temperature: 44°C

Night set-back: Heater type TIU are equipped for control via a control wire (fixed lowering of 3,5°C)

Installation distance requirements	TIU / TIUS / TU
Minimum distance to side wall:	2 cm
Minimum distance to floor:	5 cm
Minimum distance to ceiling or window sill:	30 cm