| Telco's new
basik heaters type PEU/ PEUS with improved, round-edged
design have been developed using tried and tested technology.
The electronic
thermostat is extremely accurat and enables the heater to
maintain a constant temperature. They are suitable
for use in all types of rooms, both wet and dry. The heaters
are NEMKO approved with protaction
classification IP 24.
PEUand
PEUS has higher power per length unit than most other
heaters on the market, and is therefore well suited to
bathrooms and other rooms with high heating requirements and
limited space.
|
Type |
EL number |
Power |
Height |
Length |
Depth |
Description |
|
PEU 03 |
54 491 21 |
300 W |
153 mm |
430 mm |
89 mm |
Normal-temperature basic heater |
|
PEU 05 |
54 491 22 |
500 W |
153 mm |
570 mm |
89 mm |
with switchbox for permanent |
|
PEU 08 |
54 491 23 |
800 W |
153 mm |
710 mm |
89 mm |
installation |
|
PEU 12 |
54 491 24 |
1200 W |
153 mm |
920 mm |
89 mm |
|
|
PEU 16 |
54 491 25 |
1600 W |
153 mm |
1190 mm |
89 mm |
|
|
PEUS 03 |
54 491 31 |
300 W |
153 mm |
430 mm |
89 mm |
Normal-temperature basic heater |
|
PEUS 05 |
54 491 32 |
500 W |
153 mm |
570 mm |
89 mm |
with cable and plug |
|
PEUS 08 |
54 491 33 |
800 W |
153 mm |
710 mm |
89 mm |
|
|
PEUS 12 |
54 491 34 |
1200 W |
153 mm |
920 mm |
89 mm |
|
|
PEUS 16 |
54 491 35 |
1600 W |
153 mm |
1190 mm |
89 mm |
|
|
Floor brackets |
54 490 45 |
|
|
|
|
|
The heaters are manufactured from extruded
aluminium sections. The complete heating element is also
made from aluminium and incorporates a heating coil,
insulation, cooling fins and connection lead in one unit.
This is a tried and tested design that provides excellent
heat distribution and a long lifetime. To prevent contact
between metal parts, we use heat-resistant silicon mats as
inserts when fastening elements.
The controls are easily accessible and
clearly visible on the right-hand side of the heater.
PEU and PEUS can both be lacquered in
special colours and supplied with curtain clamps and floor
brackets, for details look at the page:
Additional
|
Specifications |
|
Flow-through heater
with on/off switch, electronic thermostat and
thermal cut-out |
|
230 V |
|
Colour: RAL 9016 White |
|
Splashproof (IP 24)
and rustproof; can be used in wet rooms. |
|
Connection: Right-hand
side |
|
Fitting to walls:
Heaters must be fitted horizontally and are
delivered with solid wall brackets. |
|
Floor installation:
Heaters can be fitted to the floor using floor
brackets that need to be ordered separately |
|
Max. surface
temperature:
44°C |
|
Night set-back: Heater
types PEU are equipped for control via a control
wire (fixed lowering of
3,5°C) |
|
Installation
distance requirements |
PEU / PEUS |
|
Minimum distance to
side wall: |
2 cm |
|
Minimum distance to
floor: |
5 cm |
|
Minimum distance to
ceiling or window sill: |
30 cm |
|
