| Telco's new skirting heaters type MEU/ MEUS with improved, round-edged
design have been developed using tried and tested technology.
The electronic
thermostat is extremely accurate and enables the heater to
maintain a constant temperature. They are suitable
for use in all types of rooms, both wet and dry. The heaters
are NEMKO approved with protection
classification IP 24.
MEUand
MEUS is particularly well suited to
eliminating draughts below large window panes that reach all
the way,or nearly all the way, down to the floor.
|
Type |
EL number |
Power |
Height |
Length |
Depth |
Description |
|
MEU 03 |
54 491 01 |
300 W |
82 mm |
530 mm |
84 mm |
Normal-temperature skirting heater |
|
MEU 07 |
54 491 02 |
700 W |
82 mm |
1075 mm |
84 mm |
with switchbox for permanent |
|
MEU 10 |
54 491 03 |
1000 W |
82 mm |
1570 mm |
84 mm |
installation |
|
MEU 13 |
54 491 04 |
1300 W |
82 mm |
2070 mm |
84 mm |
|
|
MEUS 03 |
54 491 11 |
300 W |
82 mm |
530 mm |
84 mm |
Normal-temperature skirting heater |
|
MEUS 07 |
54 491 12 |
700 W |
82 mm |
1075 mm |
84 mm |
with cable and plug |
|
MEUS 10 |
54 491 13 |
1000 W |
82 mm |
1570 mm |
84 mm |
|
|
MEUS 13 |
54 491 14 |
1300 W |
82 mm |
2070 mm |
84 mm |
|
|
Floor brackets |
54 490 20 |
|
|
|
|
|
The heaters are manufactured from extruded
aluminum sections. The complete heating element is also
made from aluminum and incorporates a heating coil,
insulation, cooling fins and connection lead in one unit.
This is a tried and tested design that provides excellent
heat distribution and a long lifetime. To prevent contact
between metal parts, we use heat-resistant silicon mats as
inserts when fastening elements.
The controls are easily accessible and
clearly visible on the right-hand side of the heater.
MEU and MEUS can both be lacquered in
special colours and supplied with curtain clamps and floor
brackets, for details look at the page:
Additional
|
Specifications |
|
Flow-through heater
with on/off switch, electronic thermostat and
thermal cut-out |
|
230 V |
|
Colour: RAL 9016 White |
|
Splashproof (IP 24)
and rustproof; can be used in wet rooms. |
|
Connection: Right-hand
side |
|
Fitting to walls:
Heaters must be fitted horizontally and are
delivered with solid wall brackets. |
|
Floor installation:
Heaters can be fitted to the floor using floor
brackets that need to be ordered separately |
|
Max. surface
temperature:
82°C |
|
Night set-back: Heater
types MEU are equipped for control via a control
wire (fixed lowering of
3,5°C) |
|
Installation
distance requirements |
MEU / MEUS |
|
Minimum distance to
side wall: |
2 cm |
|
Minimum distance to
floor: |
5 cm |
|
Minimum distance to
ceiling or window sill: |
20 cm |
|
