|
|
|
|
Skirting heaters - GIU / GIUS |
|
| Telco's skirting heaters type
GIU/ GIUS are tried and tested flow-through heaters with
high -quality mechanical thermostats. These heaters have a
splashproof design and are suitable
for use in all types of rooms, both wet and dry.
GIUand GIUS is particularly well suited to
eliminating draughts below large window panes that reach all
the way,or nearly all the way, down to the floor.
|
Type |
EL number |
Power |
Height |
Length |
Depth |
Description |
|
GIU 03 |
54 490 05 |
300 W |
79 mm |
575 mm |
83 mm |
Normal-temperature skirting heater |
|
GIU 07 |
54 490 06 |
700 W |
79 mm |
1116 mm |
83 mm |
with switchbox for permanent |
|
GIU 10 |
54 490 07 |
1000 W |
79 mm |
1616 mm |
83 mm |
installation |
|
GIU 13 |
54 490 08 |
1300 W |
79 mm |
2116 mm |
83 mm |
|
|
GIUS 03 |
54 490 15 |
300 W |
79 mm |
575 mm |
83 mm |
Normal-temperature skirting heater |
|
GIUS 07 |
54 490 16 |
700 W |
79 mm |
1116 mm |
83 mm |
with cable and plug |
|
GIUS 10 |
54 490 17 |
1000 W |
79 mm |
1616 mm |
83 mm |
|
|
GIUS 13 |
54 490 18 |
1300 W |
79 mm |
2116 mm |
83 mm |
|
|
Floor brackets |
54 490 20 |
|
|
|
|
|
The heaters are manufactured from extruded
aluminium sections. The complete heating element is also
made from aluminium and incorporates a heating coil,
insulation, cooling fins and connection lead in one unit.
This is a tried and tested design that provides excellent
heat distribution and a long lifetime.
The controls are easily accessible and
clearly visible on the right-hand side of the heater.
GIU and GIUS can both be lacquered in
special colours and supplied with curtain clamps and floor
brackets, for details look at the page:
Additional
|
Specifications |
|
Flow-through heater
with on/off switch, bi-metal thermostat and
thermal cut-out |
|
230 V |
|
Colour: Pearl white |
|
Splashproof and rustproof; can be used in wet rooms. |
|
Connection: Right-hand
side |
|
Fitting to walls:
Heaters must be fitted horizontally and are
delivered with solid wall brackets. |
|
Floor installation:
Heaters can be fitted to the floor using floor
brackets that need to be ordered separately |
|
Max. surface
temperature:
82°C |
|
Night set-back: Heater
types GIU are equipped for control via a control
wire (fixed lowering of
3,5°C) |
|
Installation
distance requirements |
GIU /
GIUS |
|
Minimum distance to
side wall: |
2 cm |
|
Minimum distance to
floor: |
5 cm |
|
Minimum distance to
ceiling or window sill: |
20 cm |
|
|
